Function, configuration and line compatibility
Review how the machine works, what it can produce and which optional functions or supporting equipment may be needed for the complete process.
Machine overview and suitable production use
Single-Layer Double-Row Toilet Paper Packing Machine
The Single-Layer Double-Row Toilet Paper Packing Machine is an individual packaging machine for toilet paper and household tissue products. It is intended to handle the specific pack format described on this page and can be connected to upstream converting or cutting equipment when a continuous production arrangement is required.
Suitable Packaging Application
Single-layer double-row toilet paper packs using cored or coreless rolls within the confirmed diameter and bundle size range.
Final suitability depends on the confirmed roll diameter, roll width, number of rolls per package, package arrangement, film or bag material and required operating method.
Machine Configuration
The standard configuration is selected around the approved package. The working range, speed, installed power and overall dimensions are not stated as fixed values before the product and packaging material are confirmed.
Operating Process
Finished toilet rolls arrive from the upstream conveyor and are separated into two parallel lanes. The counting and grouping section forms a single-layer double-row arrangement according to the selected number of rolls. The grouped rolls enter the wrapping section, where film is fed around the bundle and sealed. The finished pack is discharged for inspection, bundling or carton packing. Stable roll diameter, accurate lane separation and suitable film properties are necessary for consistent packing.
Optional Functions
Automatic roll counting, dual-row lane guide, servo film feeding, printed-film registration, adjustable end sealing, tear opening, date coding, reject device, extended infeed conveyor and customized electrical standards.
Supporting Equipment
Toilet paper rewinding machine, automatic log saw, roll separator, lane-dividing conveyor, roll accumulator, case packer, carton sealer and finished-package conveyor.
Information Required Before Configuration
Finished roll or tissue pack dimensions
Number and arrangement of products in each package
Packaging film or prepared bag specification
Required shift output and working hours
Upstream and downstream equipment
Destination voltage, frequency and compressed-air conditions
Available workshop dimensions and material-flow direction
Configuration Note
This page describes an individual packaging machine rather than a complete production line. Numerical operating parameters must be confirmed from the actual product and approved technical agreement. Unverified speed, power and dimensional values have not been presented as guaranteed specifications.
Upstream Equipment
The double-row wrapper is normally installed after a toilet paper rewinding machine and roll-cutting section. The infeed layout must match the finished-roll diameter, row arrangement and required pack count.
How the machine processes the material
Finished toilet rolls arrive from the upstream conveyor and are separated into two parallel lanes. The counting and grouping section forms a single-layer double-row arrangement according to the selected number of rolls. The grouped rolls enter the wrapping section, where film is fed around the bundle and sealed. The finished pack is discharged for inspection, bundling or carton packing. Stable roll diameter, accurate lane separation and suitable film properties are necessary for consistent packing.
Sensors, guides, drives and sealing components are adjusted around the approved package. During commissioning, the feeding position, grouping rhythm, film tension, sealing condition and finished-pack discharge should be tested with representative production material.
Actual output is controlled by the complete working cycle and the stability of upstream feeding. Machine settings should be changed whenever the product dimensions, roll quantity or packaging material changes.
Machine data for configuration review
| Machine Name | Single-Layer Double-Row Toilet Paper Packing Machine |
|---|---|
| Machine Type | Single-layer double-row toilet paper packing machine |
| Pack Arrangement | One layer with two parallel rows |
| Suitable Rolls | Cored or coreless toilet paper rolls within the confirmed range |
| Roll Quantity | Customized according to the required retail pack |
| Film Type | Heat-sealable film selected from the approved pack specification |
| Feeding Method | Dual-lane conveyor feeding |
| Counting and Grouping | Automatic or semi-automatic according to configuration |
| Design Speed | Confirmed from roll size and pack arrangement |
| Installed Power | Confirmed from the selected drive and sealing system |
| Overall Dimensions | Confirmed after the infeed and discharge conveyors are defined |
| Video URL | Not published; request the matching operating video after confirming the package format. |
All values marked as confirmed or customized must be finalized from the product sample, packaging material and approved machine configuration.
Functions available by requirement
Machines used before or after this process
Design speed and reference output are not the same value. Practical production depends on raw material, finished-product dimensions, machine configuration, operator preparation and the capacity of connected equipment.